-
Posts
808 -
Joined
-
Last visited
-
Days Won
87
Content Type
Profiles
Forums
Store
Gallery
Articles
Blogs
Events
Downloads
Posts posted by AdamG
-
-
I would recommend using ones that are strong and are able to transport food safely....that way you can send me some of that brisket once its done!πππ
Sous vide is something I have not tried sorry. Would be good to see some photo's of the process if thats ok?
-
That looks really goodππ»
- 1
-
Dont forget to throw extra in for meππ
- 1
-
If heavy constant rain starts mid cook then you need to open vents slightly to counter it being cooled down and try to close them back about 20 mins before the rain stops...which is hard to predict. Light showers and sunny/cloudy dont affect it though.
I highly recommend the rotisserie for christmas, I have done turkey on it the last 3 years and its super juicy and slightly smokey. It also has the added bonus of leaving the kitchen oven free for other foodπ
-
Sounds good, I have a local butchers which is great for all the common cuts, however he does struggle to get some of the rare cuts/joints. Usually I would order them but theres no telling when he gets them in which makes it hard to plan cooks. I will check out waitrose next time im nearπ
-
-
-
Thanks @valve90210Β πit turned out good enough for me.
i managed to finish it just in time for the rain hahaπ€π
-
Cheers!π
It was sunny when I lit the lumpwood and then 20 mins later it started, but once its lit then your committed haha.
There is another post in the homemade section regarding the tableπ
-
I have never made pastrami before however I seem to remember (i think??) @pittmabΒ doing one earlier in the year...or towards the end of last yearπ€
- 1
-
We decided this morning that we fancied a steak for tea....but the hob aint working at the moment due to a gas leak coming from it (its capped off so dont worryπ) and it was forecast light rain on and off today. I said 'sod it, Im having one!'π
i managed to get it lit just before it started raining again. It got quite heavy just as I was putting the steak in. Then it stopped just as it was ready....now its raining none stop so a lucky cookπ»
Anyone else throw caution to the wind once in a while with the bad weather?
- 1
-
Looks good to meπ, when I read that you ran out of time I thought it was gonna end with you doing a caveman sear.
Was it approved by mgmt?
-
Thanks @U can do that againΒ I appreciate the commentπ....now I have more room to store the leftovers hahaπ»π
-
Thanks for the kind commentΒ @pittmabπ hopefully I can get a cook on it today and see how it goes with the temps inside the cupboards.
-
2 years ago (yes that long ago!) I decided that I wanted to upgrade from my Kamado stand to a proper kamado table. After looking around I decided that I had 3 options:
1, Buy a stainless steel frame for roughly Β£1000 or a wooden table for roughly Β£700-Β£900. (more than I wanted to spend)
2, Buy a cheap stainless kitchen counter and mod it into a suitable table. (non seemed strong enough for the weight)
3, Make a stainless steel or wooden table from scratch myself.
I originally opted for option 3 (wooden table) due to materials being cheaper...however with my lack of experience working with wood, coupled with the cost of having to buy tools made that more expensive. Option 3 (stainless steel table) made more sense due to my experience with metal, my previous/current job role and access to the tools required. After talking with my boss about fabricating my own table during my spare time in the factory, it became a viable option....so off to the drawing board I wentπ
Part 1 was to make a frame, originally I was going to purchase some box section however 1 year ago, there was enough excess stainless steel angles from a previous customer's job just waiting to be used....So I bought the angle offcuts from my boss for a good price.
I cut them down to the required size, notched the required ends and then prepared them for welding.
Β
I welded the bottom of the frame first
followed by the top
finally welded the whole frame together, added the middle shelf and bolted the castors/wheels on. I also took the frame home so I could measure the next part and also get it out of the way for work colleague's.
I also added a sheet of galvanized steel onto the shelf for the kamado to sit on.
After designing the rest of the table disaster struck!!
By the time I was ready for the next stage, the price of metal had gone through the roof....pushing the cost to Β£1100, more than the tables I had seen the previous year...and this was just to finish the job and did not include what I had already spent! I was forced to play the waiting game and have an eyesore of an unfinished table in the garden.
Prices came down very slowly and at the end of August this year It was finally low enough to carry on. I ordered the remainder of the stainless steel and worked on it during September. Once all the cutting on the laser, folding, drilling and welding was complete I took the frame back into work.
First thing was to weld the cupboard bases in
Then I welded the sides and back panel on and took it back home to finish.
I then glued the valance panels and trims on.
installed the waterproof plug socket.
The final step was to put the doors on, put the kamado back in placeΒ and then peel all the plastic wrap off.
Here is the finished result.
Inside the cupboards
access to the bottom of the Kamado (and bottle opener, top right corner of the photo, this was a necessity!)
The temperature controller cover
Temperature controller
temperature probes (which can also be seen in the above photo)
Β
It took a lot longer than expected to finish this (mainly due to the price of metal shooting up) but I'm glad its all finally done. The total cost for everything was very close to Β£525. Most people think I'm mad (I probably am!) for spending this on a bbq table but I'm hoping I get many years out of it and the kamado. It's not perfect but its certainly good enough for meπ
Next job is to get back to cooking barbecue since I have missed out on a few weeks due to this project and being busy in work....and put that bottle opener through it's paces hahaππ€£πΊ
Thanks for looking!π
Β
- 3
-
Looks delicious, have you saved me any? π
Or has @negolienΒ beat me to it?ππ»
- 1
-
I may have to do one of these soonπ
- 1
-
Looks great, the glaze looks like it has a treacle like textureπ
- 1
-
I will keep an eye out for itπΒ Hopefully I will get some more cooks in soon aswell, I have been occupied with work lately.
-
Looks delicious, only just noticed the reply tonight sorry.
- 1
-
Looks goodπ
- 1
-
Lookin good so farπ
- 1
-
I should imagine it would work wirh mushroom soup...im not a huge fan of mushrooms myself so Im interested in seeing how this turns outπ
Alternatively, (and to throw a spanner in the worksπ), you could do a beef bourguignon
Here is one I did last year...
Β
-
Welcome to the forum!
The Bird is the word 16 pounder gonna get some work
in Poultry
Posted
Looks good and I think pepper is first in lineπ