rb76 Posted July 14, 2021 Share Posted July 14, 2021 I just bought a Weber Genesis II and would like to use the butane cylinder and regulator I already have (the blue one in the image). The clip on the Weber hose though is a type I haven't seen - any suggestions on how to remove it, ideally without destroying it? Quote Link to comment Share on other sites More sharing options...
rb76 Posted July 14, 2021 Author Share Posted July 14, 2021 (edited) Alternatively, I'll buy a new hose. My measurements are that the connector is a left-hand 1/2" major, 13/32" minor thread, but that doesn't seem very common. Does Weber use non-standard connectors? Edited July 14, 2021 by rb76 Quote Link to comment Share on other sites More sharing options...
The Chairmaker Posted July 25, 2021 Share Posted July 25, 2021 Those clips are crimped on and are not reusable. Just cut it off and replace with a jubilee clamp of the correct size. Quote Link to comment Share on other sites More sharing options...
Icefever Posted July 25, 2021 Share Posted July 25, 2021 The Butane reg looks used?? (is it ok?? they don't last forever) you need to check the Bar pressure of the blue one with the Webber one to see if they match....just to make sure. Ice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.