Jump to content
valve90210

Electronics help needed...delay switch to add to my qmaster

Recommended Posts

A while I got myself a qmaster lite to control the temps of my smoker, it works pretty well but it does have one flaw, when I lift the lid to do anything to the meat etc obviously the temperature drops in the cooking chamber. This causes the fan to come on when really it's not needed as the coals are just as they need to be for the temperature I want, this action of the fan coming on causes the coals to get hotter and the temp overshoots.

If I could add in a means of stopping the fan from coming on for 10 minutes or so after I've opened the lid, to give the cooking chamber temp chance to get back to where it was I think it would work a lot better, at present I have to unplug the fan and try to remember to plug it back in which is far from ideal.

In an ideal world what I would like would be something whereby I can press a button and that would activate a timer relay which would break the circuit to the fan for a few minutes.

I'm guessing it might be possible to use something like this: DC 5V 12V 24V Digital LED Cycle Timer Delay Time Relay Switch  but How exactly I could get it working is a little beyond my electronics knowledge...  Can anyone help me with this perchance?

 

 

Share this post


Link to post
Share on other sites
Guest homer

simple is sometimes best..why not just fit a switch to the blower to turn it on and off

you would need a power supply to run the timer unless your controller has a plug in one you can tap off and a little enclosure to mount it in

Share this post


Link to post
Share on other sites
Guest homer

you could go further by fitting a micro switch or capacitive  proximity sensor which can detect when the lid is open, 

on my weber pid build controller i just used to switch it off..it would power back up with the same temp settings and start up again

on the pellet smoker i  wick down the temp to minimum setting and back up when the lid is closed..have to be careful as it does try to shut down with too many pellets fed in and fan holding back 

Share this post


Link to post
Share on other sites

I could if I knew what I was doing but that definitely sounds well beyond my skill level sadly. for the time being I'll stick to unplugging the fan for a few minutes and trying to remember to plug it back in...lol

 

Share this post


Link to post
Share on other sites

Hi Scott - you will probably find that one of these will do the trick. You would just need to connect the relay in line with the fan's power supply. This is button activated and will switch off the fan from 1-20 minutes - depending on what you have set. If I were you I would go for the AS3085 as, although it is a couple of pounds more expensive, it is already assembled.

https://quasarelectronics.co.uk/Item/3085-2-555-monostable-timer

It would be straightforward to mount it in a small project box with a big red button on the lid ?

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Ooo, that does look like the sort of thing I need as it's basically prebuilt, I may have to get myself one and have a tinker!! Cheers Wade :thumb1:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...